Archives

Plasma Cutting

20 Sep 2022

Plasma cutting has been in use since the 1960s and is still the preferred method for automotive repair shops, fabrication shops, industrial construction sites and salvage operations. This is largely due to the high speeds and precision cuts these machines can achieve.

While it was rather time-consuming and expensive in the early days, advancements in technology and engineering techniques made it a more user-friendly, economical and productive method. In this article, we discuss different plasma cutting methods, how it works, some of the applications and pros and cons.

28 Oct 2016

When you work in manufacturing you have a decision to make; laser, plasma or waterjet cutting? ‘Which one is best?’ is the first question that many people ask. The most up to date and technologically advanced must be the best, surely? Well that’s not the case. In fact there could be a case for using any or all 3 of the manufacturing processes depending upon your needs and what you value most from the machine.

Each has its own advantages and disadvantages, from speed to cost and even waste. So let’s take a look at each option.

10 Dec 2011

Plasma cutting has been in use since the 1960s.  Today it is a widely used metal cutting process.  Unlike conventional “metal against metal” cutting, plasma cutting doesn’t produce metal chips so it can create accurate cuts.

Although initially plasma cutting was quite time consuming and expensive, it emerged as a more user-friendly, economical and productive method by the 1980s, due to the application of modern engineering techniques.

Here we discuss the different methods of plasma cutting as well as how it works, applications and pros and cons of utilising it in an engineering application.

Plasma Cutting Processes

First, there are three major processes used for plasma cutting:

Air plasma – In general, a hand-torch is used for metal cutting in this system. It is considered to be the most portable plasma cutting option. In most cases, it uses inverter power supply technology. The important features of this process include:

    • The system can run within a power output range of 12 amps to 120 amps
    • Cutting thicknesses can be achieved as low as 1/8 inch

Mechanized plasma – This conventional plasma cutting system is extensively used in shipyards, steel service centers and heavy-equipment manufacturing companies in order to obtain high productivity. The notable features of this technique are:

    • Uses machine-mountable torches
    • Available in amperages ranging from 130 amps to 1,000 amps
    • Cutting thicknesses of up to 61⁄4 inches can be achieved
    • It requires constant manual monitoring on different factors, such as gas flow, pressure, arc voltage

High definition plasma – This system has emerged as the most viable metal cutting solution in the industry over the last two decades. After its introduction in the 1990s, it went through several research and development processes. High quality cuts, economical operating cost and high cutting speeds are some of the major benefits of using this system. Initially, it had a thickness capacity of 3⁄8 inches. However, with advancements in engineering technology, now cutting thicknesses of up to 3 inches are easily achieved.

Some of the important features of this process are:

  • In order to achieve quality in cutting, plasma cutting equires monitoring by expert operators
  • Cutting thicknesses can be as low as 26 gauge to as big as 3 inches. When used on carbon steel, thickness capacity of up to 61⁄4 inch is also achievable
  • It requires power levels ranging from 130 amps to 800 amps
  • Technology updates on plasma cutting methods are continuing to evolve in order to obtain better results in cut quality and productivity

How do you see this kind of technology helping your manufacturing processes in the future? Let us know in the comments below.

Events

October 2024
M T W T F S S
 123456
78910111213
14151617181920
21222324252627
28293031