Vacancies at PRVCall Us: 01495 769697

Tag Archives: 5 Axis Machining

PRV Engineering > 5 Axis Machining
12 Sep 2013

Five Axis Machining is the way forward

Five Axis machiningPRV-Engineering Ltd are constantly moving with the times and investing in equipment to make sure the company stays ahead of its competitors. Over the last 12 months, managing director Simon Jones has invested more than £1.25million as part of the overall development of the Pontypool based engineering company.

Through the acquisition of and constant investment in new technology, PRV has moved forward at a significant rate of knots with one of the latest additions to the company’s plant being a state of the art, vertical travelling column machining centre with full Five Axis Synchronous milling ability – the Mazak VTC800/30SR

What is Five Axis machining?

Read More

14 Jun 2013

Advances in 5-axis machining

5-axis machining is now used by many machining companies and allows machining of a part along 5 axes of motion compared to 3 axes in one setup. While this can be a cost saving factor, 5 Axis machining is used more often for complex contour work, which may need simultaneous movement of all 5 Axes.

Recent advances in software have helped make the conversion from 3-axis and 3+2 axis positioning to simultaneous 5-axis machining accessible to everyday numerical control  programmers.

Although some of these techniques might require additional programming time, the benefits of reduced machining, setup time and reduced hand-polishing outweigh the costs.

Read More
13 Apr 2013

5 Axis Milling Technology and its Advantages

5 Axis Milling technology takes the chequered flag as Formula 1 Team Lotus install 5 new HPU 450U machines at their workshop in Enstone, Oxfordshire. Team Lotus are one of the latest companies to give in to the promise and potential that the 5 axis milling process holds; a process that leading high precision machining specialists PRV-Engineering were quick to recognize the advantages of.They wre one of the first companies in the UK to invest in this latest state of the art engineering discipline.

One Machine Replaces Many

Read More

12 Mar 2013

Investment is the Key to Future Success – Simon Jones – PRV Engineering

Investment is the key to future success; so says Simon Jones, CEO of PRV Engineering, and after all, he should know. PRV Engineering are one of the fastest growing and most successful high precision engineering service providers in the UK. They owe it all to the fact that they are prepared to invest in their own future. In the same way that the government’s education policy was coined as being “education, education, education”, PRV’s philosophy would be coined as “investment, investment, investment!

Staying at the Cutting Edge

The engineering sector is one of the fastest growing technical sectors in the economy. Recent advances in CAD/CAM, and new breakthroughs in programmable software packages are opening new pathways all the time. It’s vitally important that if an engineering company wishes to stay at the cutting edge of its industry, it understands that investment is the key. It must have the latest plant and machinery otherwise it will lose its competitive edge.

Read More
11 Dec 2012

Motorsport Engineering Sales in the Ascendancy

Motorsport Engineering Sales in the Ascendancy

Motorsport engineering sales are in the ascendancy. Over half of the specialist high precision engineering companies that cater for this exclusive market, have reported increased sales year on year according to figures released by the MIA (Motorsport Industry Association). The MIA’s report states that 10% of suppliers realised increases of over 50%. It is clearly a trend that is bucking that of UK manufacturing sector as a whole.

Read More
6 Aug 2012

5 Axis Machining – CNC Engineering at its Most Exacting by PRV Engineering

5 Axis Machining – CNC Engineering at its Most Exacting by PRV Engineering

5 Axis machining is the one of the most advanced components of Computer Numerical Control, (or CNC for short as it is more popularly known in the engineering world), metal engineering. CNC machining has been around now for several decades. It heralded the arrival of pre-programmed automation on a scale of accuracy hitherto unknown. Hardly surprising then that PRV Engineering, one of the engineering industry’s top exponents of top quality engineering services, should be at the forefront of this technology; not only here in the UK, but across mainland Europe too.

As engineering technology progressed, it was only a matter of time before machining in all available planes became a possibility. Having computerised control that allows the pre-programming of very complicated operations in all five axis, has now been taken to the ultimate level with some stunning 5 axis machinery coming onto the market – none better that PRV Engineering’s travelling vertical column machinery centre, the Mazak VTC800/30SR.

Read More
1 Feb 2012

Implications of HS2 on the Engineering Industry

No doubt you will have seen that the High Speed Two (HS2) rail system project has recently been given the go-ahead by the British government.

This new rail line is intended to revolutionise high-speed transport in Britain, reducing travel times between our major cities of London, Birmingham, Manchester and Leeds.  View a map of the rail system here.  Millions of journeys normally taken by road and air could be taken instead by high-speed rail, benefiting the environment as well as the British traveller.

New general secretary Steve Murphy said: “The development of high speed rail will provide a vital shot in the arm to the whole country especially regions which have suffered from under investment for decades.

“The project will create thousands of construction jobs initially while the line is being built and in the long term as these vital improvements in infrastructure will encourage future investment opportunities.”

In this post we’d like to begin exploring the implications of HS2 on the UK Engineering industry.  No doubt this will be a topic we continue to explore as the project develops.

Read More
23 Jan 2012
15 Aug 2011

Why Choose PRV Engineering for 5 Axis Machining

Around 20 years ago machining workshops were pondering over whether they should switch over to CNC (Computer Numeric Controlled) from manual mills. Those who didn’t jump on the CNC bandwagon were eventually left behind . Today, the scenario for 5 axis milling and machining technology is somewhat similar. Many industries today, particularly those where a high degree of precision is required such as medical devices, optical equipment, aircraft, transport, aerospace and satellites have already turned to 5 axis technology as a way of speeding up manufacturing ability as well as increasing repeatable accuracy. The ability to produce complex machine parts offered by 5 axis machining allows for reduced labor time and tooling costs which lead to higher precision as well as lower costs per part. In this article we will take a look at the various advantages and benefits associated with 5 axis machining and why PRV Engineering invests and continues to invest in this technology on behalf of our clients.

Read More

Search

Categories

Recent Comments

Events

December 2024
M T W T F S S
 1
2345678
9101112131415
16171819202122
23242526272829
3031  

Tag Cloud

Aerospace aviation CNC Machining Construction Engineering Engineering Developments Manufacturing New technology PRV Engineering Technology