Busbars, or buss bars, are also known as busbar trunking systems that distribute electricity with greater ease and flexibility. They are often metallic strips made from copper, brass, or aluminium that ground and conduct electricity better than other more permanent forms of installation and distribution.
An electrical bus bar can be defined as a conductor or group of conductors that collect incoming electricity and distribute it to an outgoing feeder circuit. The choice of bus bar depends on different factors such as reliability, flexibility, costs and time. Here is everything you need to know.
Where Are Busbars Used?
Rather than branching the main supply at one location, busbars allow new circuits to branch off anywhere along the route of the busway. A busbar is used to connect high voltage equipment at electrical switchyards, and low voltage equipment in battery banks but it is also prominent in the automotive and defence sectors.
What Is A Copper Busbar?
Copper is a highly versatile material known for its low electrical and thermal resistance as well as superior mechanical strength. It also has a higher resistance to fatigue failure properties which makes copper a key component in busbars of electrical utilities. This includes switchgear, panel boards, and busway enclosures for local high current power distribution. However, it can be used for nearly any application within specification.
Is An Aluminium Busbar As Good As Copper?
When compared to copper, aluminium busbars are manufactured using a lighter material which makes it more cost-effective to mass-produce. It offers a great solution for companies where budget, maximum weight and ease of installation are major considerations. Although aluminium is lighter, it must have a larger surface area than copper as it is not as conductive as copper. To match the same criteria of a copper bus bar, the size of the conductor must be larger and that is not always practical or feasible. While aluminium is the main alternative to copper and has many positive attributes, it’s been shown that in almost every practical aspect, copper is the better choice.
What Are Laminated Busbars?
Laminated busbars have layers of fabricated copper that are separated by thin dielectric materials which are laminated into a unified structure. The layers are heated and compressed into an integrated component that offers several performance advantages over single-layer bus bar and cable conductors. The size and application vary from surface mounted busbars smaller than a coin to multilayer busbars several feet in length.
Why Are U-shaped Busbars Popular?
The reason why U-shaped busbars are popular is due to their ability to deliver continuous and reliable connections while maximising the potential locations. Here are a few more benefits to take note of:
- The U-shape has a better weight distribution that mitigates distortion from excessive force
- It enables simple expansion, reconfiguration, or relocation operations
- The shape applies continuous pressure to every joint
- U-shape busbars create a solid connection and eliminate the need for routine maintenance
Is Using A Busbar System Really More Energy Efficient?
People are always looking for ways to increase energy efficiency to cope with fluctuations in demand and busbar systems are often the solution. They not only reduce system costs while improving reliability but also increase capacitance and help eliminate wiring errors and lower inductance. The physical structure of a bus bar is a benefit in itself as it offers unique features in mechanical design. Multilayer busbars, for example, provide better structural integrity compared to other wiring methods. You can use busbars to conduct any form of electrical current from any type of grid. Recommended: Guidance for Design and Installation Of A Copper Bus bar
The Importance Of Monitoring Power Usage For Better Efficiency
Energy efficiency remains one of the top concerns in industrial organisations and the corporate world. However, you can’t improve energy efficiency if you are not measuring it properly and without a baseline. If you don’t continuously measure performance and evaluate results, it is almost impossible to identify areas for improvement.
Some busbars do offer power monitoring as a standalone system mounted to electrical panels, or incorporated into a busway and branch-circuit applications. If you monitor power usage, you will be able to achieve the following:
- Identify current power costs which will help set a baseline
- Determine potential cost savings and set consumption goals
- Implement certain projects to further improve energy efficiency
- Continuously measure usage for more accurate results and optimisation efforts
Why Are Busbars Coated?
Busbars are made from corrosion-resistant copper, brass or aluminium in solid or hollow tubes. The shape and size are either flat strips, solid bars or rods that allow for more efficient heat dissipation due to the high surface area to cross-sectional area ratio. Even though copper oxidises over time, it remains conductive but it requires more power to move electricity along the surface. While it cannot completely prevent oxidising over long periods, it greatly reduces the effects. Bus bar coatings typically serve three main purposes, namely:
- Inhibit corrosion
- Increase conductivity
- For cosmetic purposes
Recommended: All The Reasons For Coating Bus Bars
Conclusion
As part of PRV’s electrical busbar manufacturing services, we provide several specialist coatings for additional insulative or conductive properties. We’ve been supplying the industry with quality busbars, conductors, contacts and connectors for many years. We use copper to manufacture all components for low, medium and high voltage industries such as rail rolling stock and trackside electrical components.
Our copper busbars offer the perfect balance between cost and application, especially with projects requiring higher levels of performance, versatility and reliability. Some of the services we offer our clients in the electrical industry include punching and folding, forging and pressing, complete machined castings and stampings, busbar fabrication, plating and heat shrink sleeving.
Find out more about PRV Engineering, busbars, deep hole drilling and other specialist engineering services on our website and our dedicated YouTube channel.
Recent Comments